|
|
|
| The heating
cable bathroom hot floor system has very simple, direct and
fast installations, too. You can bury the cable in the cement
layer, between layers of parquetry. Or put them above the existing
floor, and then spread your new ceramic tile. Hot air rises
to ceiling in the ordinary heating system, and gets back to
the floor height again after temperature reduces. The heat of
heating cable bathroom low-temperature radiant heating system
is distributed evenly on the surface of the whole floor ----The
hot air rises ----The simple basic physics rule has solved the
problem that the whole indoor heat is distributed and conducted.
It makes your indoor space comfortable and warm - foot temperature
warm and delightful, body temperature cozy and jolly, head temperature
fresh and nature. |
 |
Bathroom mirror surface
demisting
In the turns of winter and spring, autumn
and winter, because indoor temperature is lower than outdoor
temperature, moisture of air difficult to send out, in addition
temperature after the bath increase the aqueous vapor, Cause
the mirror gathering a large number of moisture, make the mirror
not a reflector any longer, The fog has been sheltered from
the mirror.
The bathroom mirror demisting device
our company develops is fixing a piece of heating cable on wall,
connecting power to control switch, and sticking the mirror,
then becoming a set of mirror demisting system.
Installation Steps:
1. According to the dimension of mirror
surface, decide the area of demisting, select type with reason.
2. Fix the demisting device on the back
of mirror
3. Parallel connection for multi-device,
and draw out the power wire.
4. Fix the mirror on the wall. Switch
on the power while demisting.
Notice:
1, Installation and test must be carried
out by professional staff.
2. The integrality of aluminium foil
heating cable must be ensured, it can't cut..
3. When need several pieces of aluminium
foil heating cable for large size mirror, mutual down lead
should be reliable to connect.
4.
|
|
|
Floor
Heating